|
Qmark® Type FDI Floor Drop In Heaters

- Quiet-for living rooms, dining rooms, even bedrooms.
- A "versatile, universal size," draft barrier heater for large
window areas, sliding glass doors, entryways, hallways, open stair wells.
Produces a flow pattern of warm air five feet wide (four feet above floor).
Single compact size (14" length x 7 1/4" width x 6 5/8" depth).
- Both the FDl1500 and FDl1504 are adaptable from 1500W to 750W.
- Additionally, the FDl1504 may be operated at 208 volts for an output of
1125W or 563W
- Quick, simple installation. Mounts between floor joists in either
direction (parallel or perpendicular to joists). Rough-in separate
housing... then simply insert "plug-in" type heater element and
fan assembly.
- Concrete accessory kit (housing pan cover and two stakes) aids
installation of heater in concrete.
- Heavy-duty grille can take almost any type abuse!
- Thermostat accessory kit (optional)
easily installed in heater (screwdriver adjusted
thru grille). When heater is installed for overall room heating, use a
wall
thermostat.
- Automatic overheat thermal protector and thermal fuse standard.
- Heavy-gauge steel housing.
- Sandalwood baked enamel grille finish.
- 80 CFM
- Limitations: Do not install in bathroom or other areas where water may
enter heater unit. Do not locate where air flow may be obstructed (under
drapes, behind doors, etc.) Keep short sides at least 3' from side walls and
long side 3" min. from side walls. Do not install in ceiling or wall.
U.L. listed
|
MEARS10014 |
M601W |
White Mears Single Pole Thermostat, wall mount |
$18.50 |
 |
|
MEARS10005 |
M601 |
Ivory Mears Single Pole Thermostat, wall mount |
$18.50 |
 |
|
MEARS10009 |
M602W |
White Mears Double Pole Thermostat, wall mount |
$18.50 |
 |
|
MEARS10008 |
M602 |
Ivory Mears Double Pole Thermostat, wall mount |
$18.50 |
 |
|
*This delivery time is for normal conditions and
is subject to factory availability. |
Qmark® is a registered
trademark of Marley Engineered Products.
|