 |
Ceramic
Wire Connectors
A cone connector for high
temperature applications. Ribbed design for easy use.
Used in electrical, heating and cooking appliances. Large skirt opening
permits fast wire entrance during hand or power drive assembly
Rated 300 volts maximum. Listed as pressure type connectors for joining
solid and/or stranded wire |
 |
Insulation - Ceramic Fiber
Alumina-silica insulation. 1" or 1/4"
thick x 48" wide. Blanket recommended for use in
infrared panels. Flexible and lightweight.
|
 |
Terminal Blocks - High Temperature Ceramic
Make wiring connections to heaters
efficient and easy with a touch safe design. 1 Pole, 5 Amps. 2 Pole,
15 Amps. 3 Pole, 15 Amps. 4 Pole, 15 Amps. Fitted with Nickel plated brass connectors, they can withstand
482°F (250°C)
|
 |
Terminal Blocks -
Very High Temperature Ceramic.
Make wiring
connections to heaters efficient and easy. 2 Pole,
32 Amps. 3 Pole, 32 Amps.
Fitted with Stainless Steel connectors, they can withstand
long term temperatures of 900°F
(500°C) and can withstand 1292°F (700°C) during short time periods. |
 |
Fiberglass
Sleeving
Secondary insulation of electrical
wires in high temperature applications. Fiberglass
Protective Sleeving (Very High Temperature, Heat Annealed).
In temperatures as high as 1200°F |
 |
Terminal
Connections
(Ring, Spade and Slide Terminals
and Butt Connectors)
High-temperature non-insulated terminals made of alloy
steel and nickel plated for temperatures up to 900°F (482°C).
|
 |
Fiberglass Cloth Tape
Fiberglass cloth tape roll with a
pressure-sensitive adhesive backing. Fiberglass cloth
tape roll with pressure-sensitive thermosetting silicone adhesive. 365° F
(185°C) rated. 3/4" (1.9 cm) wide x 108 ft. (32.91 m) long roll. |
 |
High
Temperature Wire & Accessories
MG and TGGT sizes 4 gauge through 22
gauge, 600 volt, 842°F (450°C), fiberglass overbraid |
 |
Aluminum Foil Tape
High temperature
tape roll with a pressure-sensitive adhesive
backing. |
 |
Thermocouple
Wire 20 gauge,
thermocouple grade stranded wire and extension grade wire
|
 |
Thermocouples and RTD's
(Resistance Temperature Detectors) |
 |
Infrared Sensors Non-contact temperature detection.
Pre-Calibrated Infrared Thermocouples, Stainless Steel, Mounting holes with
screws, Airpurge/Aircool |
 |
Ceramic
Insulators hold metal coils.
120-480 Volt. Maximum safe
operating temperature is 2000°F (1093° C) |
 |
Ceramic Beads (1/2LB Bag) (1610
Beads) for protecting power lead wires.
Ceramic Interlocking and Tubular Beads for Insulation (Steatite C220) for
protecting power lead wires. Sold by the bag. 22 sizes available. |
 |
Heat Transfer and Release
Compound
Improves heat transfer and release of cartridge, tubular
in drilled holes. Strip and Ring heaters in grooves or clamped on to rough
surfaces. Recommended for use in the above applications where sheath
temperature of the heater is expected to exceed 750°F. Excellent heat
transfer coefficient approaching that of aluminum. Max. Temperature: 1800°F |
|
|
