Mor Electric Heating Logo

Questions? 1-800-442-2581
8:00am-5:00pm M-F (Eastern Time)

Shopping cartShopping Cart

Our secure online ordering website:
ur other websites: and

Home | Ordering | Contact Us | Heaters | Controls | Accessories | Search

TPI Corporation.  A Comfort Conditioning Company

We are an authorized distributor for TPI Corp. (Markel Products, Raywall, Redd-I, Columbus Electric, Stemco and Fostoria Ind.) (heat equipment, ventilation equipment, lighting equipment and temperature controls)

TSH Series Fan Forced Kickspace Specialty Heater. Fits into soffits, stair risers or under utility cabinets, Finned steel sheath heating element and manual reset thermal cut-out, Recessed opening: L = 22 3/8” W = 3 5/8” D = 11 1/2” 3900 Hydronic Baseboard Heaters. Permanent mount, liquid filled elements, Residential models in “White” powder coat finish, Commercial models available in “Bankers Bronze”, Extruded 12 gauge aluminum housing
FFH Quartz Tube Assemblies. 900 watt, 120 volt comfort spot heating for residential and commercial applications. Hang by its chains and plug into any 120 volt service with 8 foot grounded cord set. Protective guard and gold anodized aluminum reflectors. FFH heaters are excellent for farrowing applications. Mul-T-Mount Quartz Lamp Assemblies. Comfort spot heating and snow melting. (208-480 volts) 3 element and 2 element Mul-T-Mount. Total Area Heating, Indoor Spot/Zone Comfort Heating, Outdoor Spot/Zone Comfort Heating or snow & ice control. The units are UL listed for both semi-exposed and completely exposed outdoor areas.
FFH Quartz Tube Assemblies. 550 watt, 120 volt comfort spot heating for residential and commercial applications. Hang by its chains and plug into any 120 volt service with 8 foot grounded cord set. Protective guard and gold anodized aluminum reflectors. FFH heaters are excellent for farrowing applications. OCH-SERIES Outdoor Trimline Quartz Tube Comfort Spot Heating Assemblies. Overhead "Spot" or "Zone" heating applications. Nearly instantaneous heat-up and can provide heat for specific areas within a large area. 120V-480V 1500-3000W, two lengths; 46" & 57", Built-in Adjustable Mounting Bracket, allows for a 45-degree tilt of the heater housing, NEMA-4 Electrical Box and Frosted Quartz Tube.
Mitey Midget Quartz Lamp Assemblies. Comfort spot heating.  Indoor industrial and commercial comfort heat applications such as: work stations, aisleways, freezer doors, farm buildings, pump houses and smoking shelters. Quartz lamps or tubes RPH Quartz Lamp Assembly. Restaurant patio and golf driving range heater. Ruby Red Quartz Lamp Included. 1600 Watts (208 or 240 Volts) Single-Phase Wiring. Optional Accessory: Wire Guard (RPHWG)  60° Symmetrical Reflector Pattern (Coilzak Bright Aluminum Reflector)
HDO Heavy Duty Comfort Heating Assemblies. Metal sheath elements. Fostoria Heavy Duty Infrared Heaters are for use in factories, warehouses, maintenance areas, machine shops and any application that exposes the fixture to shock and vibration. Fostoria's u-shaped metal sheath elements are stable and more shock resistant than quartz lamps or tubes. CH Portable or Suspended Quartz Tube Assemblies. Mounted either on a two-wheel cart or suspended by chains.  120 volt with two 1000 watt quartz tubes; or 240 volt with four 1425 watt quartz tubes FHK-1 Cart: Welded steel frame. 15' grounded cordset, molded plug. Choose from a two tube (120 volt) unit (Special non-household 20 amp, 120 volt receptacle required) or four tube (240 volt) unit, mount on a two-wheel cart (FHK-1), or suspend by chains from the ceiling.
Quartz T-3 Lamp Replacement Elements. 3/8" diameter clear or red quartz envelope. Pigtail lead wires are approx. 6" length. Quartz Tube Replacement Elements Translucent quartz as the enclosure. 5/8" diameter clear quartz envelope  Nickel-chrome alloy coiled element.
U-Shaped Metal Replacement Elements.  .430" diameter Inconel metal sheath. Available wattages: 1800 to 4500W. Available voltages: 120 to 600V TaskMaster 5100 Heavy Duty Unit Heater.  Suspended Fan-Forced Unit Heaters ranging in size from 3 to 25KW at 208 to 600 volt.
FHK Portable Comfort Space Heaters. Infrared Job-Site Heater. 120-577 Volts.  Infrared Job-Site Heater.  Industrial grade construction includes a gold anodized aluminum reflector, and a heavy duty safety screen. Steel two-wheeled cart, (powder coated black), and large diameter wheels.  U-shaped inconel metal sheath infrared heating element; nickel-chromium heating coil is embedded in magnesium oxide powder . Cable Kits available for models that do not include a cordset. Type FEP Hazardous Location Cabinet Unit Heaters. NEMA 4 Hose-Down Hazardous Location Convection Heaters are for use in: "Class I, Division I & II, Groups B, C & D." (T2A-UL, CSA, T3A-CSA).  Voltages range from 120V to 600V.
Pre-Wired Contactor Panels, 50-300 amps, 1-6 contactors, NEMA 1 Enclosures. A contactor panel is necessary to handle the heating KW load in a given infrared installation. VHC-15 controller. Solid State Variable Device controls heat loads up to 15-Amps.  208/240Volt "In-Line" Controller. Built in On/Off knob switch with surface plate included. Designed for a 2" x 4" electrical wall box mounting. Can operate both Quartz Lamp & Quartz Tube Infrared Heaters
FTC-30 30-Minute Manual Timer. Inline or connect to contactor panel. Includes time switch, wall plate and knob control. Recommended for a 2-1/2" deep double gang box, or installed outside using a NEMA type 3R enclosure (not supplied). 208/240 Volts Heat Wave (240-600 Volt electric indoor space heater)  Safety yellow heater enclosure with safety screens on both air intake and output openings. Optional 25' long SO type cord, ready for plug attachment is available for each model. Thermostat adjustment 40° to 100° F . Switch for fan only operation 800 CFM - 15 KW units, 1100 CFM - 30 KW units
178 TMC Ceramic Fan Forced Heater. 850w & 1500w heat settings plus fan only setting. Automatic reset type limit control. Thermal cut-off device. 6' long - 3 conductor cord. Temperature control thermostat. Width: 11 1/4'. Height: 10". Depth: 7" Type HLA Hazardous Location Unit Heaters.  Suspended Fan-Forced Unit Heaters.  3 to 25KW at 208 to 600 volt. They're designed for rugged industrial applications in hazardous locations where the possibility of explosion or fire exists due to flammable gases, vapors, powdered metals or dusts.
ICH-240C Fan Forced Utility Heater. CONSTRUCTION SITE / UTILITY HEATER, Operates on 240v or 208v, Steel tubular heating element, 43°F air heat rise, Internal overheat thermostat, Temperature control thermostat, 6' long cordset HF Fan Forced Portable Unit Heater. Operates on 240v or 208v, Finned steel tubular heating element, Internal manual reset thermal cut-out, 6' long cord with molded plug, Temperature control thermostat with 35°F to 85°F range, 10’ air throw - 262 CFM. Swivel base can be used as a wall, floor or ceiling mount
Modular Loading Dock Fan/Light 24" / 40" / 60" LONG ARMS WITH TWO ELECTRICAL OUTLETS TO ACCOMMODATE A FAN, A LIGHT OR A FAN AND A LIGHT. Modular Fan, 18" high velocity circulator plugs into electrical outlet on arm. Modular Lights - Wire guard included with each type of light head. Modular Standard Duty Loading Dock Lights.  Incandescent • Quartz Halogen • High Pressure Sodium • Metal Halide. 24" / 40" / 60" ARMS WITH MODULAR PLUG RECEPTACLE. Arms constructed of yellow powder coated, 14 gauge steel tubing.  5' Cordset and plug.
Loading Dock Light Motion Sensor Activated.  Energy saving sensor turns light on instantly when a person or tow motor enters the sensor field. Safety yellow and black powder coated finish on 1 1/2" square steel tubing. 500w bulb,  5' Cordset and plug. Heavy Duty Portable Utility Lights CART LIGHT STANDS WITH GFCI.  TRIPOD LIGHT STANDS.  QUARTZ HALOGEN LIGHT HEADS. METAL HALIDE LIGHT HEADS. CART LIGHT STANDS WITH GFCI.  10" diameter rubber wheels. 15' all-weather, water and oil resistant SJTW 18/3 cordset and molded NEMA 5-15 plug. Square 12 ga. steel square tubing construction.  Height adjustable from 5' to 11'.
Portable Utility Lights. Incandescent • Quartz Halogen • Fluorescent • Metal Halide Loading Dock Lights - Fully Assembled.  Incandescent • Quartz Halogen • High Pressure Sodium • Metal Halide. 120 Volts. Arms constructed of yellow powder coated, 14 gauge steel tubing. 5' Cordset and plug.
  Hotpod electric In-line duct heater installs in existing ductwork, and allows the homeowner to control the temperature of any individual room, each with a wall thermostat.  Zoning of rooms is achieved with a powerful 120 CFM at an incredibly quiet 46 decibels. 720 Watts. 120 Volts.  Installed where current or new ductwork is located (between floor joists in basement, attic rafters, etc.) GCH4000 Fan Forced Garage/Shop Heater. Fostoria Markel/Tpi Corp. Operates on 240v or 208v. Wall/Ceiling Mount Included - 4000/3000 Watts at 240/208 V - 43F temperature rise - Built in bi-metal double pole thermostat - 50F to 90F range - Steel tubular heating element

170TS Under the Desk Heater. TPI Corp./Markel/Fostoria Confined space radiant heat panel. 170 Watts, 120 Volts, 1 Phase, 580 BTU's, 6 foot long plug and cordset, 22-3/4 inch x 8 inch x 1-3/4 inch

PCH48C Portable Quartz Infrared Heater. TPI Corp./Markel/Fostoria Spot Heater. 1500 Watts, 120 Volts, 1 Phase, 5120 BTU's, 15 foot plug and cordset, height adjust from 2 to 6 feet

RPH Pump House Convection Heater Powder coated epoxy steel case. Provides excellent protection against freezing for pump houses, utility rooms, relay stations, construction sheds, and many other industrial spaces. aluminum finned heating element. High and Low heat control.    


Complete listing of all TPI Corp. SKU's available for online ordering at

Replacement Parts

Home ] Up ] Fostoria Industries, Inc. ] Markel Products Co. ] Complete listing of all TPI Corp. SKU's available for online ordering at ]

We are a Distributor of Industrial, Commercial and Residential Heaters and Controls. Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website. © Copyright 1999-2019 Mor Electric Heating Assoc., Inc.

5880 Alpine Ave. NW - Comstock Park, MI 49321  USA
Tel 616-784-1121 - 800-442-2581 - Fax 616-784-7775

   follow our blog   Find us on FaceBook   watch our youtube channel   Follow us on Twitter