|Home | Ordering | Contact Us | Heaters | Controls | Accessories | Search|
EASYHEAT PSR Pre-Terminated Self-Regulating Freeze Protection Cable for Water Pipes and Roofs
We are an authorized distributor for EasyHeat, Inc.
Our blog on Heating Cable
Links to other pipe heating cable:
NuHeat Plug-in Kits. Self-regulating heating cables for residential and commercial pipe freeze protection applications.
Danfoss Ice Guard Self-Regulating Pipe Heat Trace. Pre-Terminated Self-Regulating Cable for pipes.
Chromalox Thermwire Pre-assembled Self-Regulating Freeze Protection Cable for Metal or Plastic Water Pipes. Ready for use up to 100 feet in length.
EASYHEAT ILH In-Line Inside the Pipe Heater freeze protection for water supply lines.
EASYHEAT SR Trace Self-Regulating Freeze Protection Cable
Wrap-On Pipe Heating Cable. Prevents frozen water pipes to –50ºF. Simply wrap on, insulate and plug in. For use on metal and rigid plastic pipes.
Danfoss PX-F Series Self-Regulating cut to length Pipe Freeze Protection Cable.
NuHeat Plug-in 13mm Pipe Heating Kits. Pre-Terminated Self-Regulating Cable for pipes.
Links to other roof heating cable:
Easy Heat ADKS Roof and Gutter Heat Trace Cable
Danfoss Ice Guard Self-Regulating Roof & Gutter Deicing Cable. Pre-Terminated Self-Regulating Cable for roofs.
Danfoss RX Roof & Gutter Deicing Cables.
Chromalox Commercial Grade Roof and Gutter Heat Trace Cable
EASYHEAT SR Trace Self-Regulating Freeze Protection Cable
Danfoss RX-C Series Roof and Gutter Heating Cable. Cut to length Commercial self-regulating cable
NuHeat Plug-in 13mm Roof and Gutter De-Icing Kits. Pre-Terminated Self-Regulating Cable for roofs.
* such as PVC or polybutylene
EASYHEAT, your industry leader in pipe freeze prevention and roof-and-gutter deicing applications, introduces PSR™ pre-terminated self-regulating cable. Imagine the convenience: each PSR cable is a pre-terminated, water-proof, off-the-shelf product with the efficiency and functionality of self-regulating technology. With this built-in application flexibility, PSR becomes a first-choice solution for your heat tracing needs.
Each PSR cable is pre-assembled for quick selection and easy installation. Select from lengths of 6', 12', 18', 24', 50', 75' and 100' right off the shelf. All cables use a 30" cold lead (the 30 inches of cold lead is not part of the specified length of the cable - i.e. the 6 ft cable is 8.5 feet long total with 6' of heated cable.) PSR accommodates water pipe diameters from ½" to 2½". For roof and gutter areas, usually one PSR cable will be sufficient.
PSR 120 VAC heating cables use a power indicator light in the plug, visual assurance that the system is working.
Using self-regulating technology, no thermostat is required: overlap the cable with no more overheating worries. Self-regulating heating cable varies its heat output in relation to the ambient temperature. As the surrounding temperature increases, the heat of the PSR™ cable decreases. When the temperature decreases, the cable heat increases along the length of the cable.
The PSR system can be installed with the confidence that it will operate for years without requiring service. When it comes to freeze protection, stay with the leader - EASYHEAT.
Optional Roof Clips and Spacers:
ZH-C Roof Clips and Spacers for Roof and Gutter Deicing
Optional Downspout Hanger Kit:
DSH Downspout Hanger Kit for Roof and Gutter Deicing
(only required on downspouts longer than 20 feet.)
Dimensions you will need:
"W" is 24" from peak to peak
"H" is based on eave overhang (See Table 2)
The cable should be installed over the unheated portion of the roof (E in Fig. 1) - normally the roof area above the overhang.
To design how much cable is needed, multiply the length of the roof edge that you want cable on by the following spacing factor:
Cable Installation Patterns:
|Add this number calculated
above to the length of the downspout. (A in Figure 2). Note: If a
downspout is located anywhere other than at the end of the cable routing, that
downspout will require double length of cable (B in Figure 2). Add extra
cable for valleys (6' per valley, C in Figure 2) and around dormers (D in Figure 2)
Example: 20 feet of roof, 24" overhang (therefore using overhang multiplier of 2.7), 1 downspout @ 10' at end of cable run, 1 valley, 1 dormer with 30' perimeter.
Cable length = (20 x 2.7) + 10 + 6 + 30 = 100 feet. Select PSR-1100 which is 100 feet. If there is excess cable it can be used in the valley or downspout. If footage required exceeds largest cable kit offered, you may need to order more than one kit. The de-icing cable cannot be cut or altered, doing so voids the warranty, and once cut it cannot be repaired.
If the project is bigger than multiple PSR kits would allow then please see cut-to-order SRTrace cable at EASYHEAT SR Trace Self-Regulating Freeze Protection Cable
Optional RS-2 Roof Cable Deicing Control
Control expense and energy use in electric roof cable protection automatically with Roof Sentry (RS-2). The RS-2 requires two conditions to be present before it energizes roof deicing cable: cold temperatures (ON, 38°F; OFF, 48°F) and the presence of runoff water from the roof in contact with its sensor wire. If only one of the conditions exists, the control will not energize the cable.
|You must have the free Adobe Acrobat Reader plug-in.|
|SB-1800 Surebond Everflex Bondaprene. For adhering metal roof clips to metal roofs only. Not for shingles (Asphalt). A tube of Surebond is estimated to be enough to adhere 20 RCK or ZH-C roof clips.|
|Optional EasyHeat EH38 Preset Thermostat for pipe heating. Thermostatically Controlled Device. Current Tap. EH38 Preset Thermostat device allows cable to energize below 38°F and to turn off automatically at about 50°F. 1500 watt, 15 amp capacity. 125 Volts. For dry locations only. With power indicator light.|
|Wrap-On Pipe Insulation. Fiberglass Pipe Insulation available in 1/2-inch and 1-inch thick rolls of high tensile strength fiberglass and is ideal for insulating pipe heating cables and hot or cold water pipes. It reduces heat loss from hot water pipes.|
|Fiberglass Cloth Tape. Fiberglass cloth tape roll with a pressure-sensitive adhesive backing. Fiberglass cloth tape roll with pressure-sensitive thermosetting silicone adhesive. 365° F (185°C) rated. 3/4" (1.9 cm) wide x 108 ft. (32.91 m) long roll.|
|Aluminum Foil Tape. High temperature tape roll with a pressure-sensitive adhesive backing. 2" (5.08 cm) wide x 150 ft. (54.86 m) long roll, 200° F (93°C) rated.|
|Item ID||Catalog #||Description||Click "Select" below to see our price and actual real-time quantity in stock|
|EASY10047||PSR1006||6' length, 30 watts, 120 VAC|
|EASY10065||PSR1012||12' length, 60 watts, 120 VAC|
|EASY10087||PSR1018||18' length, 90 watts, 120 VAC|
|EASY10057||PSR1024||24' length, 120 watts, 120 VAC|
|EASY10046||PSR1050||50' length, 250 watts, 120 VAC|
|EASY10089||PSR1075||75' length, 375 watts, 120 VAC|
|EASY10091||PSR1100||100' length, 500 watts, 120 VAC|
|EASY10055||DSH||Downspout Hanger Kit (2)|
|EASY10058||ZH-C||Roof Clips and Spacers (25)|
|EASY10011||RS-2||Roof Sentry De-Icer Control (controls 1 cable)|
|MORSNOW10001||SB-1800||SureBond Everflex Bondoprene|
|CHROM383355||AT-1||Roll of Aluminum Tape, 2" Wide x 150 ft Long|
|TAPE10004||SM431||3/4" Fiberglass Cloth Tape, 3/4" x 36 yds|
|WRAPON16503||16503||Standard 3-inch Wide Fiberglass Insulation|
|WRAPON16506||16506||Jumbo 6-inch Wide Fiberglass Insulation|
|WRAPON16509||16509||Vinyl-Backed 3-inch Wide Fiberglass Insulation|
|WRAPON16525||16525||Pipe-Guard 3-inch Wide Fiberglass Insulation|
|*Delivery time for the following items: typically ships in 7 working days or less plus the time of your selected UPS delivery method.|
|EASY10255||PSR2006||6' length, 30 watts, 240 VAC|
|EASY10256||PSR2012||12' length, 60 watts, 240 VAC|
|EASY10257||PSR2018||18' length, 90 watts, 240 VAC|
|EASY10102||PSR2024||24' length, 120 watts, 240 VAC|
|EASY10213||PSR2050||50' length, 250 watts, 240 VAC|
|EASY10258||PSR2075||75' length, 375 watts, 240 VAC|
|EASY10192||PSR2100||100' length, 500 watts, 240 VAC|
*This delivery time is for normal conditions and is subject to EasyHeat factory availability.
EasyHeat is a registered trademark of EasyHeat, Inc.
We are a Distributor of Industrial, Commercial and Residential Heaters and Controls. Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website. © Copyright 1999-2015 Mor Electric Heating Assoc., Inc.
ELECTRIC HEATING ASSOC., INC.