|Home | Ordering | Contact Us | Heaters | Controls | Accessories | Search|
EASYHEAT AHB Constant Wattage Pre-Terminated Length Pipe Heating Freeze Protection Cable
We are an authorized distributor for Easy Heat, Inc.
Our blog on Pipe Heat Trace Cable
Links to other pre-terminated pipe heating cable:
NuHeat Plug-in Kits. Self-regulating Pre-Terminated with a Plug and Cordset heating cables for residential and commercial pipe freeze protection applications.
Chromalox Thermwire Pre-assembled Pre-Terminated with a Plug and Cordset Self-Regulating Freeze Protection Cable for Metal or Plastic Water Pipes.
EASYHEAT ILH In-Line Inside the Pipe Heater freeze protection for water supply lines.
Wrap-On Pipe Heating Cable. Prevents frozen water pipes to –50F. Simply wrap on, insulate and plug in. Pre-Terminated with a Plug and Cordset. For use on metal and rigid plastic pipes.
EasyHeat PSR Pre-Terminated with a Plug and Cordset Self-Regulating Cable for pipes.
NuHeat Plug-in 13mm Pipe Heating Kits. Pre-Terminated Self-Regulating Cable for pipes.
Danfoss Ice Guard Self-Regulating Pipe Heat Trace
Links to cut to length pipe heating cable:
EASYHEAT SR Trace Self-Regulating cut to length Freeze Protection Cable
Danfoss PX-F Series Self-Regulating cut to length Pipe Freeze Protection Cable.
EASYHEAT, the leader in residential pipe freeze protection, presents the AHB Series pipe heating system. Pre-assembled and ready to install, the cable prevents pipes from freezing, keeping water flowing to -40F. With it's energy saving thermostat, AHB cables operate on 120 Volts AC and are suitable for use on plastic and metal water pipes. EASYHEAT AHB pipe heating cable (pipe trace) stops ice before it starts. This traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the electricity on and off, based on the temperature. This ready-to-install system comes in one compact package complete with grounded plug, thermostat and easy-to-follow instructions. Construction of the AHB system includes braided metal jacket for ground, black outer jacket, thermostat, 2 foot orange 18/3 supply cord with grounded plug and integral power indicator light.
Tough PVC inner insulation.
Weather-resistant PVC outer jacket.
Continuous ground braid for safety.
3-wire grounded cord and plug.
7 watts per foot.
Approved for rigid plastic and metal pipe.
UL Listed to U.S. and Canadian Safety Standards
This system can be installed with confidence that it will operate for years without requiring service. All components are made of the highest quality material and are tested during critical points in the manufacturing process.
The AHB Series system is easy to buy and to install, engineered in 3 foot increments to accommodate many pipe lengths with diameters up to 1.5 ". Simply run the cable straight along the pipe and valves according to the included instructions, affix with our premium application tape and insulation, then plug into a standard electrical outlet.
|The AHB system also includes a power indicator light in the plug for assurance that the system has power.|
|You must have the free Adobe Acrobat Reader plug-in.|
|Wrap-On Pipe Insulation. Fiberglass Pipe Insulation available in 1/2-inch and 1-inch thick rolls of high tensile strength fiberglass and is ideal for insulating pipe heating cables and hot or cold water pipes. It reduces heat loss from hot water pipes.|
|Fiberglass Cloth Tape Fiberglass cloth tape roll with a pressure-sensitive adhesive backing. Fiberglass cloth tape roll with pressure-sensitive thermosetting silicone adhesive. 365° F (185°C) rated. 3/4" (1.9 cm) wide x 108 ft. (32.91 m) long roll.|
|Aluminum Foil Tape High temperature tape roll with a pressure-sensitive adhesive backing. 2" (5.08 cm) wide x 150 ft. (54.86 m) long roll, 200° F (93°C) rated.|
|Wrap-On Current Sensing Device - #18900. Detect if your pipe heating cable is operating. Plug the cable you want to monitor into it and observe the indicator light. 10-foot cord, sensor with light on cord, 1500 watt/12 amps at 120 VAC capacity and a receptacle with a piggyback plug design.|
|Item ID||Catalog #||Description||Click "Select" below to see our price and actual real-time quantity in stock|
|EASY10074||AHB013||3' length, 21 watts|
|EASY10059||AHB016||6' length, 42 watts|
|EASY10100||AHB019||9' length, 63 watts|
|EASY10187||AHB112||12' length, 84 watts|
|EASY10199||AHB115||15' length, 105 watts|
|EASY10210||AHB118||18' length, 126 watts|
|EASY10146||AHB124||24' length, 168 watts|
|EASY10101||AHB130||30' length, 210 watts|
|EASY10090||AHB140||40' length, 280 watts|
|EASY10078||AHB160||60' length, 420 watts|
|EASY10008||AHB180||80' length, 560 watts|
|WRAPON16503||16503||Standard 3-inch Wide Fiberglass|
|WRAPON16506||16506||Jumbo 6-inch Wide Fiberglass|
|WRAPON16509||16509||Vinyl-Backed 3-inch Wide Fiberglass|
|WRAPON16525||16525||Pipe-Guard 3-inch Wide Fiberglass|
|CHROM383355||AT-1||Roll of Aluminum Tape, 2" Wide x 150 ft Long|
|TAPE10004||SM431||3/4" Fiberglass Cloth Tape, 3/4" x 36 yds|
|WRAPON18900||18900||Current Sensing Device|
*This delivery time is for normal conditions and is subject to Easy Heat factory availability.
EasyHeat is a registered trademark of Easy Heat, Inc.
We are a Distributor of Industrial, Commercial and Residential Heaters and Controls. Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website. © Copyright 1999-2015 Mor Electric Heating Assoc., Inc.
ELECTRIC HEATING ASSOC., INC.