0) {
extract($_POST, EXTR_PREFIX_ALL, "f");
$message =
"Name: $f_full_name \r\n" .
"Title: $f_title \r\n" .
"Company: $f_company \r\n" .
"Street Address: $f_address1 --- $f_address2 \r\n" .
"City: $f_city \r\n" .
"State/Province: $f_state \r\n" .
"Zip/Postal Code: $f_zip \r\n" .
"Country: $f_country \r\n" .
"Phone: $f_phone \r\n" .
"Fax: $f_fax \r\n" .
"Email: $f_email \r\n" .
"-------------------------------------------------\r\n" .
"\r\n" .
"1.) Size of tank?: $f_1_tank_size \r\n" .
"2.) What material is the tank made out of?: $f_2_tank_material \r\n" .
"3.) What \"gauge\" or thickness are the tank walls?: $f_3_wall_thickness \r\n" .
"4.) Is the tank covered?: $f_4_covered\r\n" .
"5.) What type of liquid is inside the tank?: $f_5_liquid_type \r\n" .
"\tWhat is the level of the liquid?: $f_5_liquid_level \r\n" .
"\tWill the level be constant?: $f_5_constant_level\r\n" .
"6.) Will any additional material be added to the tank?: $f_6_additional_material_added\r\n";
if($f_6_additional_material_added == "yes") {
$message .=
"\tWhat type of material will be added?: $f_6_additional_material_type\r\n" .
"\tHow much material will be added?: $f_6_additional_material_amount\r\n" .
"\tHow often is the material added?: $f_6_additional_material_added_frequency\r\n";
}
$message .=
"7.) What is the required operating temperature of the material?: $f_7_required_temperature_of_material\r\n" .
"8.) What is the required warm-up time?: $f_8_warm_up_time\r\n" .
"9.) What is the ambient temperature?: $f_9_ambient_temp\r\n" .
"10.) Is the tank insulated?: $f_10_tank_insulated\r\n";
if($f_10_tank_insulated == "yes") {
$message .=
"\tHow thick is the insulation?: $f_10_insulation_thickness\r\n" .
"\tWhat type of insulation is used?: $f_10_insulation_type\r\n" .
"\tIs the base of the tank insulated?: $f_10_tank_base_insulated\r\n";
}
$message .=
"11.) Is the tank located indoors or outdoors?: $f_11_inout_tank\r\n" .
"\tIs the base of the tank raised off the ground?: $f_11_raised_off_ground\r\n" .
"\tIs the base of the tank resting on an insulated or uninsulated concreat slab?: $f_11_base_rest\r\n" .
"12.) Is the surrounding area considered a hazardous location?: $f_12_hazardous\r\n";
if($f_12_hazardous == "yes") {
$message .=
"\tLocation Classification: $f_12_Location_classification Class $f_12_Location_division Division\r\n";
}
$message .=
"13.) What voltage is available?: $f_13_voltage\r\n" .
"14.) Is there any electrical limitation (such as amperage) allocated for the system?: $f_14_electrical_limitations \r\n" .
"15.) What is the operating tempurature tolerance?: $f_15_operating_temperature_tolerance \r\n" .
"16.) Is there a particular style of heater you would like?: $f_16_style \r\n" .
"17.) Is there a particular heater manufacturer that you prefer?: $f_17_heater_manufacturer \r\n" .
"18.) How soon do you need the quote?: $f_18_how_soon_do_you_need_quote\r\n" .
"-------------------------------------------------\r\n" .
"\r\n" .
"Comments:\r\n" .
"$f_S1";
$INFO_MESSAGE = sendForm("Tank Heating Questionaire", $message);
}
?>
Tank Heating Questionaire
";
}
?>
Tank Heating Questionnaire
ScrewPlug Immersion Heater Quote Request
Form
When heating tanks of various fluids, there are several types of heaters that can be
used. Immersion heaters placed in the fluid, strip heaters attached to the outside of the
tank, barrel/blanket/silicone heaters around the outside of the
tank or heat trace cable wrapped around the outside of the tank.
Sales@HeatersPlus.com
|
|
view cart
 |
|
Mor Electric Heating Assoc., Inc. is a
Distributor of Industrial, Commercial and
Residential Heaters and Controls.
Always consult
manufacturers installation instructions for proper installation of the
products or systems shown on this website. |
|
When you are ready to order you will be taken to our secure online
ordering website:
www.MorElectricHeating.com.
Visit
our other websites for home, office and factory infrared heating, fans
and air conditioning:
www.InfraredHeaters.com
and
www.Fans-Plus.com. |
