HeatersPlus.com Questions? 1-800-442-2581 8:00am-5:00pm M-F (Eastern Time)	Shopping Cart Our secure online ordering website: www.MorElectricHeating.com. Our other websites: www.InfraredHeaters.com and www.Fans-Plus.com.
	Home | Ordering | Contact Us | Heaters | Controls | Accessories | Search

Qmark^® Electric Heating Products

We are an authorized distributor for Qmark Electric Heating Products (A Division of Marley Engineered Products)

We are an authorized distributor for Marley Engineered Products, manufacturer of Qmark^® electric heating products.

	Standard 2500 Series Residential Baseboards For new construction or remodel applications. For single family homes, apartments, modular or mobile homes as primary, secondary or supplemental heat.		Type HBB Type HBB Hydronic Baseboard. Navajo White Enamel Finish.  Low unit surface temperatures.
	Type QMKC Commercial Baseboard. 18 Gauge Front Cover. For high-traffic areas such as restaurants, offices, schools, institutions, etc.		Type CBD Heavy Duty Commercial Baseboard Heaters. This heavy-duty baseboard is designed specifically for commercial use. The front cover is made of 16 gauge cold rolled steel.
	Type CRA Wall Heaters Wall Mount Fan Forced Zonal Heaters. Complete unit: Heater assembly, grille, back box and factory installed DP thermostat.  Suitable for use in almost any room. 500 - 1000 Watt units are approved for ceiling mounting.		Type WHT500 Utility Well/Pump House Heater.  Install it anywhere heat is needed to prevent pipes, pumps, and other water, hydraulic fluid or oil-filled equipment from freezing.  Set the thermostat at any desired level and leave it.
	Type CWH 3000 Commercial Fan-Forced Wall Heater.  For supplementary heating of offices, reception rooms, game rooms, family rooms and similar light-duty commercial and residential applications. 1500, 2000, 3000, 4000 and 4800 watts; 208, 240, 277 volts.  Integral thermostat.		Type CWH 1000 Commercial Fan-Forced Wall Heater.  Heating element is heavy duty steel fins brazed to steel sheathed tubular elements in a grid pattern that covers the entire discharge area.  Airflow system maximizes air volume at minimum noise level; 65 CFM
	Type AWH Architectural Heavy-Duty Fan-Forced Wall Heater.   For supplementary heating of offices, reception rooms, game rooms, family rooms, and similar light-duty commercial and residential applications. 1500, 2000, 3000, 4000, and 4800 watts; 208, 240, 277 volts; 60 hz.  Integral thermostat.		Type EFQ Commercial Fan-Forced Wall Heater.  Ideal for offices, stores, schools, churches, hospitals, dormitories, airport terminals, reception rooms, entrance lobbies, corridors and stairwells. Unit installs easily in either new or remodeled buildings.  Operates at 6,000 or 8,000 watts at 208V, 240V, 277V, 347V, 480V or 600V, 1Ø, 60 Hz. Integral thermostat.
	Type 1235 120 and 240/ 208 Volt Wall Heaters. Use as an add-on heat source or as a primary heat supply. Recess mounted installation; horizontal or vertical mounting. Front mounted thermostat for convenient room comfort control		Type LFK Commercial Wall Heaters.  For supplementary heating of offices, reception rooms, game rooms, family rooms and similar light-duty commercial and residential applications. 2000, 3000, 4000 and 4800 watts at 240 volts; 60 hz. Steel finned metal sheath electric heating elements with low sheath temperatures provide uniform heat and long service life. Recess or surface mount in standard 2" x 4" stud walls
	Type GFR 120 and 240/208 Volt Wall Heaters.  Ideal for bedrooms, dens, basements, converted attics, breezeways, garages, bathrooms, small offices, workshops, and other similar areas. Also adaptable to multiple installations in somewhat larger or odd shaped rooms. Wattage range from 375 watts (1280 Btu/hr) to 2400 watts (8190 Btu/hr)		Type QFG 120, 208 and 240 Volt Wall Heaters. Suitable for use in almost any room. Use single heaters in smaller rooms such as bedrooms and bathrooms. Use multiple heaters (controlled by a single thermostat) in larger rooms such as living rooms and family rooms.
	Type CDF Ceiling Heater. Recess or Surface Mounted Commercial Downflow Heater. 2000 to 5000 watts. 208 - 240V		Type EFF Ceiling Mounted Heater. Dependable and quiet for use almost anywhere in institutional, commercial, or industrial areas where wall space is not available. Models from 1500 to 4800 watts. Room temperature is controlled by a remote wall or built-in thermostat which must be purchased separately.
	Type QCH Ceiling Mounted Heaters.  Designed for dens, basements, converted attics, breezeways, garages, bathrooms, small offices, workshops and similar areas. 500 to 2000 watts Room temperature is controlled by a remote wall thermostat which must be purchased separately.		Type FDI Floor Drop In Heater. Quiet-for living rooms, dining rooms, even bedrooms.  Mounts between floor joists in either direction (parallel or perpendicular to joists). Heavy-duty grille can take almost any type abuse! Thermostat accessory kit or use a wall thermostat.
	Type PT268 4000W Portable Industrial Grade Heater. Adjustable, Automatic Thermostat . Efficient Fan-Forced Heat . Safety Overload Switch With Caution Light . Heater Automatically Shuts Off If Unit Overheats . Live Power Signal Light . Full One-Year Warranty		Type QTS Toe Space Fan-Forced Heater. A toe-space heater will fit where no other heater will. It can be recessed into toe space areas under kitchen or utility room cabinets or into the soffit area above them. It is convenient for checkout counters, ticket or tollbooths and many other places where no other heater seems to fit.
	Type MUH-35 Unit Heater.  5KW or 3.3KW @ 240V (3.7KW or 2.5KW @ 208V.  Fan-Forced, Metal Sheath - Hard-Wired Heater. Mounts either on the wall or from the ceiling can be used for primary or spot heating. For factories, garages, schools, etc.  Multiple wattage heat selector switch. Built-in bi-metal thermostat. Range 40° to 90°F.		Type QPH4A Portable Unit Heater (240 Volt for workshops, storage buildings and garages) Perfect for construction job sites, garages, workshops, any unheated area. Two heat settings: 9102 BTUs (2667 Watts) 13,652 BTUs (4000 Watts). Three-way bracket lets you stand unit on floor or other flat surface, or mount to ceiling or to wall. Adjustable thermostat to maintain heating comfort levels. Comes equipped with 6-foot cord.
	Type MWUH Unit Heater. 240/208 Volt ceiling mounted.   Applications include primary, supplementary, or auxiliary heat source in factories, stores, garages, warehouses, public buildings, service stations, workshops, etc.  Ceiling mounting bracket for horizontal or vertical flow mounting or any position in between.  Built-in single pole thermostat.		Type CU Cabinet Unit Heaters. Surface, full recessed or semi-recessed on the ceiling, floor or wall.  Foyers, Lobbies, Large Rooms, Entryways and Meeting Rooms, Restaurants, Bowling Alleys, Banks, Retail Stores, Passenger Terminals, Theaters, Hotels, etc.  High / Low Heat Setting.  2Kw to 32Kw; five cabinet styles - 35", 45", 58", 68" and 78" lengths
	Type JUW Washdown corrosion resistant heater. Heavy-gauge stainless steel case. Comfort heating or freeze protection in non-hazardous dusty/dirty environments including: waste water treatment plants, coal handling areas, food processing plants, foundries, steel mills, cement plants, car washes, swimming pool areas, canneries and dairies. Internal thermostat, 40ºF -100ºF		Type MUH Unit (Blower) Heaters.  Mounts either horizontally or vertically. For factories, warehouses, garages, stores, shipping rooms, power stations, aircraft hangers. Can be used for primary, supplementary, spot, or dual-system heating. Forced air unit heater with 10 power ratings; from 3KW to 50 KW heating output; 208, 240, 277 and 480V
	Type GUX Explosion proof unit heater low operating temperatures.  Designed to heat areas classified as hazardous locations. Typical applications involve oil refineries, sewage treatment plants, petrochemical plants, oil rigs, unattended pumping stations, chemical storage and handling facilities, paint storage areas, and countless other hazardous areas.		Type IUH Unit Heaters.  Primary, supplementary, or auxiliary heat source in factories, stores, warehouses, public buildings, service stations, workshops, etc. All motors and contactor coils are 240 volt and operate on the secondary of a factory installed step-down power transformer on 480 and 600 volt heaters so a separate fan and motor control power source is not needed.  5 to 30 KW.
	ARL Rollaround Infrared Heaters. 240-480 Volts. Portable - Mounted on two-wheeled carts for ease of movement to areas that are hard to heat. Economical answer to warm workmen, thaw frozen equipment or heat loading dock areas where permanent installed heaters are not practical. Heavy duty metal sheath tubular heating elements. Weatherproof - For indoor or outdoor use. Heater can be washed down. Safety Screen standard. 25-foot optional accessory cord sets available.		Type ICG Explosion proof heater.   Explosion proof junction boxes. Corrosion resistant powder coating. Designed to heat areas classified as hazardous locations such as petroleum refineries and gasoline storage and dispensing areas, industrial firms that use flammable liquids in dip tanks for parts cleaning, petrochemical companies manufacturing chemicals, dry cleaning plants, utility and natural gas plants, aircraft hangars, fueling areas, and many other hazardous areas covered by these classifications.
	CP Aztec Radiant Ceiling Panels. For supplementary heating of offices, reception rooms, game rooms, family rooms, and similar light-duty commercial and residential applications.		RCC Cove Heaters. Convenient wall mounting near ceiling. 4" x 2 7/8" and length varies from 34" to 132". For supplementary heating of offices, reception rooms, game rooms, family rooms, and similar light-duty commercial and residential applications.
	WPC1500 Radiant Convection Panel Heater 120 Volt - 500/1000/1500 watt. Three prong grounded cord set. Removable wheel kit allows unit to be wall mounted near electrical outlet. Thermostatically Controlled Portable Heater With Three Levels Of Heat.		Fan Forced/Radiant Utility Heater - Deluxe Type MCM. Portable, rugged and reliable heater that gives you three choices of heat settings and plugs into a standard 120 Volt household outlet with its 6 foot, 3 prong plug & cord set.
	Qmark Plug-In Under Desk Heaters. This 120 volt, slim, off-white panel is designed to fit out of the way standing on it's own or mounted under a desk, and it is controlled with it's own On/Off switch (with indicator light). For cold secretaries, bank tellers, receptionists, cashiers, anyone who sits at a desk.		Fahrenheat Type LFP 120 Volt Portable Hydronic Baseboard Heater. Plugs into a standard 120 Volt household outlet with its 6 foot plug & cord set. For Supplemental heating of bedrooms, game rooms, family rooms and small areas in homes, apartments, condos and offices. Automatic thermostat lets you maintain desired comfort level. Heater design produces gentle, radiant heat even after the thermostats been satisfied.
	CRN Infrared Heaters.  120-240 Volts. Minimum mounting height: 10 feet. Heater can be washed down after being disconnected.  90 degree symmetrical reflector. Metal sheathed tubular heating element. Optional accessory wire guard.		Qmark Fahrenheat Type FBE 120 Volt Portable Baseboard Heater.  120 volt with 6 foot plug & cord set. Safety thermal cutout protection.
	Fahrenheat Type MMHD 120 Volt Fan Forced Utility Heater.  Two heat settings for a full range of comfort. Automatic thermostat. Fan only feature to circulate air during non-heating periods. Tip over safety switch and thermal limit. Built-in chromed carrying handle and chromed guards. 120 Volt grounded cord and plug.		BRM Industrial Infrared Heaters. 240-600 Volts. Heaters can be suspended just like fluorescent lighting fixtures to focus heat where desired. Designed for heavy duty spot heating or total heating applications. Heavy duty metal sheath heating elements. Can be operated indoors or out. Heater can be washed down
	A564 Infrared Bath Heat Lamp. Up to 375 Watt, R-40 Infrared Heat Lamp Provides Instant Warmth . Inside Reflective Lamp Surface That Directs Gentle Heat Rays Downward. Use With Conventional Wall Switch.		Type FRP/FRS 2 or 3 element quartz fixture. Total or supplement (spot) heating in commercial and industrial areas, assembly lines, aircraft hangers, outside smoking areas, work stations and shipping areas.  Snow melting for waiting areas and entryways, stairs, parking lots, driveways and loading docks, smoking areas. Metal Sheath, Quartz Tube or Quartz Lamp elements
	B560 Infrared Heat Lamp Bath Fan. Up to 375 Watt, R-40 Infrared Heat Lamp Provides Instant Warmth . Inside Reflective Lamp Surface That Directs Gentle Heat Rays Downward. Use With Conventional Wall Switch		Type BRH Portable Contractor Heater, 240/208 Volts, 16.7-23.3 Amps.  For construction job sites, commercial workshops and other large unheated areas. Built-in thermostat Safety high temperature limit. Industrial finger proof, steel intake and discharge grilles
	MM698 and MM728 Decorative Bathroom Fan/Heater.  120 Volts. Heat Unit Delivers 1500 Watts of Instant Heat. Attractive White Elliptical Grill . Unbreakable Lexan® Lens Diffuses Light From Maximum 100 Watt Lamp		B674W Infrared Bath Heat Lamp. Up to 375 Watt, R-40 Infrared Heat Lamp Provides Instant Warmth . Inside Reflective Lamp Surface That Directs Gentle Heat Rays Downward. Use With Conventional Wall Switch.
	680FRD Ventilating Fan with Built-in Radiation Damper. Protection against flame penetration and radiant heat. For use in bathrooms and other areas where ventilation is required. Meets the building code requirements for both commercial and multi-family construction when a fire rating of up to 3 hours is required. 4" steel duct adapter with integral back draft damper pre-assembled to housing.		B660W Infrared Heat Lamp Bath Fan. Up to 375 Watt, R-40 Infrared Heat Lamp Provides Instant Warmth . Inside Reflective Lamp Surface That Directs Gentle Heat Rays Downward. Use With Conventional Wall Switch
	ECP Series - Euro Style Wall Convector Heater. Convection and Radiant warmth from one heater. Heater can be surface mounted or recessed into 2x4 or larger wall sections. It is designed to fit between 16" O.C. studs.  High temperature plastic grille offers attractive appearance in a neutral color that is compatible with any decor. Contemporary styling uses soft curves on all edges, avoiding the sharp corners of a square design.		MM698F Decorative Bathroom Fan/Heater.  120 Volts. Uses Energy Efficient 13 Watt Compact Twin Tube Fluorescent Lamp (not included) . Heat Unit Delivers 1500 Watts of Instant Heat
Qmark Fans, Blowers, Air Curtains and Convectors (non-heated):
	Extra Heavy Duty Non-Oscillating Air Circulators. optional 2430PB pole and base. 2-speed, 1/2 hp, 120 volt, totally enclosed motor. Permanently lubricated ball bearings. Heavy-duty pull chain. 8.1 Max. Amps		LDC20 Light Commercial Duty Pedestal Air Circulators. All Metal Construction Pull Chain Switch, 3 Speed Control, Double Locking Guard, 6' Grounded Cord, Up/Down 15 Deg. Fan Head, Maximum Height 60" Top of Guard, Meets OSHA Standards
	Industrial Oscillating Air Circulator. Oscillates in 90º arc or can be locked in fixed position. 1/4 HP, 1Ø, 2-speed, 115 volt, ball bearing, totally enclosed, permanently lubricated permanent split capacitor motor. Pull chain switch. 12' long 3 conductor SJT type cord. Coated steel blades. Double locking chrome plated guard. Fan head tilt: Pedestal 15º up or down; Wall mount 15º up or down. Column adjustment: 48-7/8" - 74-5/8". 27" diameter steel dome pedestal base.		Industrial Non-Oscillating Air Circulator.  1/4 HP, 1Ø, 2-speed, 115 volt, totally enclosed, permanently lubricated permanent split capacitor, ball bearing motor (220V, 1Ø motor also available). Pull chain switch. 3 conductor SJT type cord. Coated steel blades. Double locking, chrome plated guards. Fan head tilt: Pedestal 10º down or 28º up; Wall mount 40º down or 0º up. Column adjustment: 48-7/8" - 74-5/8". 27" diameter steel dome pedestal base.
	Heavy Duty Oscillating Air Circulator. General cooling in occupied open areas, such as staging areas, courtrooms, classrooms and auditoriums. 1/4 HP, 3-speed, 120 volt, totally enclosed, thermally protected, PSC motor with permanently lubricated ball bearings. Heavy duty pull chain switch. 12' long 3 conductor SJT type cord. Coated steel blades. Vinyl coated guard. American-made safety clutch style oscillating mechanism allows fan to operate at 45º or 90º or in a fixed position. Available as a 24" or 30" Pedestal or Wall mounted fan.		Mach 30 Heavy Duty Industrial Pedestal Fan/Air Circulator. High performance grade fan. 1/3 HP, 2-speed, totally enclosed, permanently lubricated permanent split capacitor ball bearing motor. Pull chain switch. 12' long 3 conductor SJT type cord. Coated steel blades. Double locking chrome plated guard. Fan Head Tilt - Pedestal: 10º down and 28º up; Wall mount: 40º down or 0º up. Column adjustment: 48-7/8" - 74-5/8" 27" diameter steel dome pedestal base.
	Automotive Air Circulator. Meets Federal OSHA standards, UL listed. Safety yellow motor, guards and mounts. 5" wheels on pedestal base. 1/3 HP, 1Ø, 2-speed, 115 volt, totally enclosed, permanently lubricated permanent split capacitor, ball bearing motor. 2-speed, drop-cord switch. 12' long 3 conductor SJT type cord. Coated steel blades. 3-1/2" oversized double locking, yellow powder coated guards. Fan head tilt: Pedestal 10º down or 28º up; Wall mount 40º down or 0º up. Column adjustment: 48-7/8" - 66" with locking collar. 27" diameter steel dome pedestal base.		Industrial Floor Air Circulators. Rollaire models: IR18 - 33" to 50" height adjustment and 5" plastic wheels. CFM range: 1550 - 6500. 1/15 or 1/8 HP motor. I18TE has a 115V 1Ø totally enclosed motor for dirty environments. 10’ Long 3 conductor SJT Type cord. 360° fan head tilt
	Retro Styled Air Circulator. High Velocity Cooling. All Steel and Cast Components. ON/OFF Oscillating Control. Extra Large Three-Speed Motor. SUPER-HI-LOW Speed Settings. Scratch-Resistant Gloss Finish. Easy Tilt Adjustments. 3 Prong Safety Power Cord		N-12 Wall and Bench Mount Air Circulators.  12” Wall or Bench Mount Circulator. 2 Speed, 115V, 1Ø, Drip Proof Motor, 1/15 Hp. All Metal Construction. Wires Directly to Electrical Line. Fan Head Adjusts 90 Degree Horizontally and Vertically
	Bolt On Utility Air Circulators. Work Benches...Steel Shelving...Machines ..... Ceilings....I-Beams....Walls ....Or Any Surface..... Mounts with one bolt or lag screw. Fan head rotates 360° in both the horizontal and vertical direction to deliver air flow to any spot in room.. Catalog # B-18TE has 115V 1Ø totally enclosed motor for dirty environments.		LCHHD Specialty Industrial Air Circulator. MOTOR 2-speed, 1/4HP, 1Ø, 277 volt, ball bearing totally enclosed, SWITCH pull chain . CORD 3 conductor SJT type. BLADE 30" unit - 3 Blade - Coated Steel, 24" unit - 3 Blade - Coated Steel. GUARD Double locking chrome plated. FAN HEAD TILT pedestal - 15 deg. down or up. wall mount - 15 deg. down up. COLUMN ADJUSTMENT 48-7/8 to 74-5/8 inches. PEDESTAL BASE 27" steel dome
	Washdown and High Humidity Model LCHWD Air Circulator. Certified Baking Industry Sanitary Standards Committee. This Exclusive Fan is Ideally Suited for Comfort Cooling in Food and Beverage Processing Facilities, Greenhouses, Poultry Plants, Amusement Parks and Other High Humidity or Washdown Environments. Mounts are Coated With FDA Approved White Epoxy		Power Cat Portable Blower Fans. High Velocity Blower That Can Be Used For Ventilating and Cooling. Can Effectively Cool Automobile Engines or Create Heated Space. It Is an Excellent Product For Ventilating Tight Work Spaces.  Ideal Workmate For The Welder. 1120 CFM Model, 2-Speed Squirrel-Cage Blower
	LPE Commercial Direct Drive Exhaust Fan. Can Be Used With or Without External Shutter. Wire Guarded Exhaust Fans. Venturi Mounted Fan,  Shutter Mounted Fan		Heavy Duty / High Performance Industrial Ceiling Fans. 56” Industrial Fans, Designed for Spacious Applications Where Maximum Area Coverage is Required. Ideally Suited for Factories, Gymnasiums, High Bay Storage Facilities. Powerful, Heavy-Duty Motor for Mounting Heights to 45 Feet. Capable of Heat Destratification to Heights of 75 Feet.
	Harsh Environment and Theater Specialty Ceiling Fans. 56” Harsh Environment Ceiling Fans. Designed and Engineered Specifically for Food Processing Plants, Wet Factory Locations, Exposed Shipping Areas, Outdoor Restaurants, Agricultural Applications Such as Poultry Houses and Greenhouses.  3-Speed Pull Chain .		Commercial Ceiling Fans. 120 Volts, 24” Steel Downrod, 4 Speed Wall Control Included, White Finish, 56" Steel Blades
	24" Air Curtain Drive-Thru Window Unit. Available in 3 versions, filter only, grill only, and filter and grill. For Use in Restaurants, Fast Food Windows, Schools and Drive-Ins. For Service Windows Up to 30" Wide With a Maximum Mounting Height of 5 Ft.		Environmental Air Curtains. Commercial - supermarkets, schools, hospitals. Food Service - restaurants, bakeries, cafeterias. Refrigeration - freezers, coolers, processing plants. Easy access; no tools required for inspection and cleaning.
	Electrically Heated Air Curtains. For Use in Customer Entrances to Treat Incoming Cold Air Where a Gentle Flow of Air Is Desired for Customer Comfort. For Use in Vestibules, Lobbies, Staging Areas, Reception Areas, Waiting Rooms and Other Customer Greeting Areas.		High Volume Air Curtains. For use in industrial and commercial freight doors or other heavy duty applications.
	High Velocity Air Curtains. For use in warehouses, manufacturing plants and other large facilities. Precision- balanced twin stainless steel blower wheels.		Air Hog Windmaker Utility Blowers. Cord Storage Wrap, 120V Duplex receptacle, Easy to Carry Handle, 8" Opening, 1225 CFM of Air Movement, Industrial Grade Grounded Cord, On/Off Control Switch, Safety yellow finish
	Accessories and Controls for Air Curtains. 20 Amp Roller Style Door Switch for use with all air curtains for instant activation or de-activation of unit upon door opening or closing. Control Panels For three- phase air curtains requiring instant On/Off Automatic Switches.

Replacement Parts

Replacement Parts with drawings in .pdf format

You must have the free Adobe Acrobat Reader plug-in.

Complete listing of all Qmark SKU's available for online ordering at www.MorElectricHeating.com

Qmark Color Selection Chart

You must have the free Adobe Acrobat Reader plug-in.

All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of original installation or 18 months from date of manufacture, except special components as noted below which are warranted against defects in workmanship and materials (see medallion levels below) from date of installation. This warranty does not apply to damage from accident, misuse or alteration; nor where the connected voltage is more than 5% above the nameplates voltage; nor to equipment improperly installed or wired or maintained in violation of the product's installation instructions. All claims for warranty work must be accompanied by proof of the installation or purchase.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs and shipping costs incurred to return products to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service center or the Marley Engineered Products Service Center and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or replacement is the exclusive remedy available from Marley Engineered Products. If the product requires replacement, but an identical model is no longer available, Marley Engineered Products will select a comparable item.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY OR CONTRACT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

For the address of your nearest authorized service center, contact Marley Engineered Products, in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the factory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization, include all numbers shown on the products.

MEDALLION LEVELS
SILVER - Limited 5 year warranty on element or motor	GOLD - Limited 10 year warranty on motor or element	PLATINUM - Limited lifetime warranty on motor for as long as you own your home. Must be original owner.

Qmark^® is a registered trademark of Marley Engineered Products.

[ Home ] [ Up ] [ Complete listing of all Qmark SKU's available for online ordering at www.MorElectricHeating.com ]