|
Qmark® Wall Heaters - Type QFG
We are an authorized distributor for Qmark®
RESIDENTIAL: QFG
Series electric in-wall heaters are suitable for use in almost any room. Use
single heaters in smaller rooms such as bedrooms and bathrooms. Use multiple
heaters (controlled by a single thermostat) in larger rooms such as living rooms
and family rooms. Wattage should be determined through heat loss calculations.
COMMERCIAL: Suitable
as the primary heat source in smaller rooms and as supplemental heat in almost
any general use area.
-
Dual Protection:
Thermal cutout
with indicator light and one time thermal fuse.
-
Tangential blower for whisper quiet
operation.
-
Northern White front cover.
-
Open coil element assures quick heat and
low maintenance.
-
Three piece construction for ease of
installation.
-
Permanently lubricated, dust-protected
bearings.
-
-
U.L. listed (UL File No. E21609)
MOUNTING LIMITATIONS
- 1. For wall mounting only.
- 2. For horizontal
mounting only (heater cannot be mounted vertically along its length.)
- 3. Do not install back box closer than 4
inches from floor, 6 inches from adjacent walls and 12 inches from the ceiling.
Do not install heater behind towel rack, behind door, in floor, in closet, in
ceiling or where airflow may be obstructed.
- 4. To insure proper operation, maintain
5-feet minimum clearance to furniture or other objects placed directly in front
of the heater.
Dimensions
Note: Use of mounting feet is optional
|
Secure
Online Ordering
*Delivery time for the following products: Typically
in stock. Shipped in 1 working day or less. The transit time to you depends on your
physical location and your selected UPS/FedEx shipping method, the cost of which will be displayed in your shopping cart.
Note: "IF" models include heater assembly and grille
only. Order back box separately. See Accessories
Note: "T2M" models are complete heater assemblies with grille, back box and
thermostat.
|
|
Item ID |
Catalog
# |
Volts |
Watts |
Back Box |
Built-in Thermostat |
Amps |
Price |
Click "Select" below to see the actual quantity in stock |
|
QMARK685360059372 |
QFG1512T2M |
120 |
275/750/1125/1500 |
Yes |
Yes |
3.1/6.3/9.4/12.5 |
$145.66 |
 |
|
QMARK685360059419 |
QFG2024T2M |
240 |
500/1000/1500/2000 |
Yes |
Yes |
2.1/4.2/6.3/8.3 |
$145.66 |
|
|
QMARK685360059464 |
QFG2224T2M |
240 |
563/1125/1688/2250 |
Yes |
Yes |
2.3/4.7/7.0/9.4 |
$145.66 |
|
|
QMARK685360088099 |
QFG1512IFM |
120 |
375/750/1125/l500 |
No |
No |
3.1/6.3/9.4/12.5 |
$117.02 |
|
|
QMARK685360059471 |
QFG2228IF |
208 |
2200 |
No |
No |
10.6 |
$117.02 |
|
|
QMARK685360088105 |
QFG2024IFM |
240 |
500/1000/1500/2000 |
No |
No |
2.1/4.2/6.3/8.3 |
$117.02 |
|
|
QMARK685360088112 |
QFG2224IFM |
240 |
563/1125/1688/2250 |
No |
No |
4.7/7.0 |
$117.02 |
|
|
Optional
Accessories: |
|
QMARK685360033631 |
GFRBB |
Back Box |
$12.97 |
|
| QMARK685360059266 |
GFRSM |
Surface Mounting Frame |
$22.42 |
|
|
QMARK685360033624 |
QFGTSP |
Acc Single pole Tstat |
$20.74 |
|
|
QMARK685360059259 |
QFGTDP |
Acc Double pole Tstat |
$23.89 |
|
|
Wall Mount Thermostats: (Optional) |
|
WR10001 |
WR-65 |
1A65-641 SPST Thermostat, 40°F to 85°F, 22 amp 120/240V, 18 amp 277V, Single Pole, wall mount |
$26.35 |
|
|
WR10002 |
WR-66 |
1A66-641 DPST Thermostat, 40°F to 85°F, 22 amp 240V, 18 amp 277V, Double Pole (D.P.S.T., Includes off
position), wall mount |
$26.35 |
|
|
AUBE10003 |
TH106 |
Aube Tech. 120/240V, S.P.S.T., Programmable Line Voltage
Thermostat |
$63.67 |
|
|
AUBE10010 |
TH115-A-240D |
Aube Tech. Double Pole, 240V Programmable Line Voltage Thermostat.
3600W @ 240V 15 Amp resistive 60 Hz 4 wires / DPST. 7-day programming,
pre-programmed, backlight. 4 wires / DPST |
$66.17 |
|
|
QMARK98319841025 |
TC1 |
Qmark Clear Plastic Universal Lockable Thermostat Guard. Dimensions: 7"L x
4.28"H x 2.74"D. |
$52.20 |
|
|
*This delivery time is
for normal conditions and is subject to Qmark factory availability.
Note: For installations over 7500 feet above sea level we recommend
using models under 1500 watts. |
|
