5880 Alpine Ave. NW
Comstock Park, MI 49321  USA Tel 616-784-1121 800-442-2581 Fax 616-784-7775 E-mail sales@heatersplus.com

visit our other website for home/office/factory infrared heating:

view cart

heaterscontrolsaccessorieslightingfans

Excel Dryer XLERATOR Model Hand Dryers

Order Online Secure Online Ordering


We are an authorized distributor for Excel Dryer, Inc.

Finally... A Fast Hand Dryer!

  • 3 Times Faster! Dries in 10-15 Seconds.

  • Uses 80% Less Energy.

  • 95% Cost Savings vs. Paper Towels.

  • GreenSpec® Approved and LEED® Rated.

  • Source Reduction Alternative.

  • Promotes Hygiene.

Saves 95% over paper towels, and 80% over the traditional dryer in operating costs

Model XL-W
Surface-Mounted
Automatic Hand Dryer
White Epoxy Painted Cover
Model XL-C
Surface-Mounted
Automatic Hand Dryer
Chrome Plated Cover

Dries Hands in 10 to 15 Seconds

Now available with a graphite colored cover:

SPECIFICATIONS

Dimensions: 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP
(298 MM LG. X 322 MM HIGH X 170 MM DEEP)
Weight:16 LBS. (7.3 KGS.)

Construction
  1. Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.
     
  2. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.
     
  3. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.
     
  4. Entire mechanism shall be internally grounded.
Mechanism
  1. Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).
     
  2. Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).
     
  3. Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.
     
Limited Warranty

The hand dryer shall be guaranteed to be free from defects for a period of three (3) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.

3 Part Specification Pages
Cost savings vs. paper towels

You must have the free Adobe Acrobat Reader plug-in.
The XLERATOR® is the first hand dryer ever to be awarded GREENSPEC® designation by the editors of Environmental Building News.  XLERATOR® meets a number of GREENSPEC® standards; it conserves energy, has low maintenance requirements and reduces waste. More simply put, XLERATOR® makes your restrooms better for the planet.

Read the article on XLERATOR® featured in Environmental Building News

  Excel Dryer is now a member of the US Green Building Council who created the LEED® program and qualifies for LEED Credits in two categories.

 

 


 

The market for warm air Hand Dryers is growing at a rapid pace for a number of reasons, as follows:

  • 90% Cost Savings vs. Paper Towels
    The energy to operate a hand dryer is less than 10% of the cost of paper towels, including the elimination of associated labor costs for ordering, storing, replenishing dispensers, collecting and disposing of paper towels. Here are some typical savings examples:

    Cost Savings associated with Excel Hand Dryers

    Cost Savings associated with Excel Hand Dryers

    A cost savings analysis worksheet is available to help you determine the effect of converting from paper towels to Excel hand dryers. Just take a few minutes to analyze the impact on your own facility.

    Cost Savings: Excel Hand Dryers vs. Paper Towels.

  • Good For The Environment
    Converting to Excel Hand Dryers is a great source reduction alternative. Many businesses and institutions are required by law to reduce non-recyclable waste.
  • Xlerator Hand Dryers are GreenSpec Approved Approved
    Excel is the only hand dryer manufacturer to achieve Xlerator Hand Dryers are GreenSpec Approved® approval.
  • Promotes Hygiene
    The use of hand dryers allows washrooms to stay cleaner and more sanitary. Picking up and disposing of bacteria-laden paper towel waste is one of the custodians' least favorite tasks.
  • Labor Savings
    Excel Hand Dryers are virtually maintenance-free, except for a recommended annual cleaning. Paper towels, by comparison, require one hour of maintenance for each case of towels used.
  • Reduced Vandalism
    Hand dryers eliminate the vandalism often present with paper towels. Towels clog toilets and sinks, can be set aflame, and are thrown, wet, onto walls and floors.
  • Always Ready For Use
    Hand Dryers are ready to be used 24 hours a day. Say goodbye to customer complaints about empty or non-functioning paper towel dispensers.
  • Best Warranty
    Excel Dryers offer the best warranty in the industry, including a 10-year unlimited warranty on our Hands On® models (see specifications for details).
  • Easy Access For The Disabled
    Hand Dryers are easily positioned at recommended heights for use by the physically challenged

Recess kit - only needed in ADA (Americans With Disabilities Act) required applications where the unit can not protrude from the wall too much because of wheelchairs, etc.

Secure Online Credit Card Ordering - SSL Encryption
delivery time: typically ships in 2-3 working days or less plus the time of your selected UPS shipping method.  Price below does not include shipping cost which is calculated using your address before entering your credit card number.

MODEL DESCRIPTION VOLTAGE, AMPS, Hz PRICE
XL-W-120 White Epoxy Painted Cover 110/120, 12.5 Amp, 60 Hz $549.00 Select

delivery time: the following typically ship in 5-10 working days or less plus the time of your selected UPS shipping method.  Price below does not include shipping cost which is calculated using your address before entering your credit card number.

XL-W-208 White Epoxy Painted Cover 208, 7.0 Amp, 60 Hz $549.00 Select
XL-W-240 White Epoxy Painted Cover 220/240, 6.5 Amp, 60 Hz $549.00 Select
XL-W-277 White Epoxy Painted Cover 277, 5.5 Amp, 60 Hz $549.00 Select
XL-C-120 Chrome Plated Cover 110/120, 12.5 Amp, 60 Hz $599.00 Select
XL-C-208 Chrome Plated Cover 208, 7.0 Amp, 60 Hz $599.00 Select
XL-C-240 Chrome Plated Cover 220/240, 6.5 Amp, 60 Hz $599.00 Select
XL-C-277 Chrome Plated Cover 277, 5.5 Amp, 60 Hz $599.00 Select
XL-GR Graphite colored cover
XL-RE Recess kit for ADA (Americans With Disabilities Act) required applications.

Home ] Up ]

view cart

Mor Electric Heating Assoc., Inc. is a Distributor of Industrial, Commercial and Residential Heaters and Controls.
Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website.

visit our other website for home/office/factory infrared heating:

MOR ELECTRIC HEATING ASSOC., INC.
5880 Alpine Ave. NWComstock Park, MI 49321  USATel 616-784-1121800-442-2581Fax 616-784-7775 E-mail sales@heatersplus.com