|
Control Panels Manufactured by
Chromalox®

We are an authorized distributor for Chromalox®
 |
Chromalox
4466/4468 Contactor Temperature Control Panel.
40, 75 or 90 Amp Contactor for Resistive Loads. 120/240/480 Vac
Fused Control Power Transformer.
Sophisticated temperature and
over temperature controllers in a corrosion
resistant NEMA 4X Fiberglas® or Nema 12 enclosure with a hinged screw cover. The panel is
completely assembled, pre-wired, tested and
ready for installation. Pilot Light or
Controller Indication of Power "ON" |
 |
SCR or contactor panels sized to any
application.
|
 |
Solid state SCR control
|
 |
Mechanical contactor control
|
 |
Single- and three-phase
|
 |
NEMA enclosures
|
 |
120 to 480 Volt
|
 |
Up to 600 Amp
|
 |
Analog and digital controllers
|


Chromalox® model 4460 and
4470 Mini Contactor Temperature Control Panels
The Chromalox 4460 and 4470 Temperature Control Panels combine full-featured,
digital-indicating temperature and over-temperature controllers completely assembled,
pre-tested and pre-wired in a NEMA 4 or 12 enclosure. Installation is easy, requiring only
power supply, load and sensor wiring. Drawings and installation/operation manuals are also
supplied.

Chromalox® model 4537
Explosion Proof Control Panel

Chromalox® model 3290
Multi-Loop Temperature Controller

Chromalox® model 3390
Multi-Loop PID Controller

Chromalox® Power Control Center
Control Panel Heating (Typically The Panels Are Located
Outdoors and Require Heating)
Calculations:
1). Calculate the total enclosure surface area in Square Inches.
2). Determine the temperature rise above ambient required (Temperature Gradient).
3). Using the graph below determine the heat loss in Watt/Sq.In..
4). Multiply the total surface area by the heat loss to determine the total wattage
required.
Note: Subtract the wattage from internal control panel components from
the total heat loss wattage required to determine the appropriate heating element wattage
required.
5). Select an appropriately sized Chromalox strip heater.
6). Select an appropriate Chromalox thermostat assembly kit as follows:
| Chrom. Part # |
Description |
| SBKT-1 PCN#386011 |
Closes at 38°F, Opens at 53°F |
| SBKT-2 PCN#386020 |
Closes at 60°F, Opens at 75°F |
| SBKT-3 PCN#386038 |
Closes at 105°F, Opens at 120°F |
** Thermostats rated at 10amps@240VAC, and 13 amps@120VAC

Chromalox® is a registered trademark.
|