Mor Electric Heating Logo

HeatersPlus.com

Questions? 1-800-442-2581
8:00am-5:00pm M-F (Eastern Time)

Shopping cartShopping Cart

Our secure online ordering website: www.MorElectricHeating.com.
O
ur other websites: www.InfraredHeaters.com and www.Fans-Plus.com.


Home | Ordering | Contact Us | Heaters | Controls | Accessories | Search

Industrial Process Heaters

Dalton Electric 1/4" - 1" Watt-Flex Split-Sheath Cartridge Heaters Contract when de-energized for ease of installation and removal 10 Foot Nichrome NiCr Open Coils. Unstretched Lengths of NiCr 60 Coiled Elements. 17-22 gage. Nichrome resistance wire elements used in convection heating, R&D, duct heaters, portable heaters and air process heaters, vacuum forming / thermoforming.  Stretch at least twice as long (20 feet) (2-1 ratio) before using.  Cut to length needed. Tightly wound coils. 1/4" approximate inside diameter.
Nichrome Wire. Resistance heating wire for cutting foam and fabrics. We stock 16-25 gauge Nichrome-60 wire sold by the foot or spool. Infrared (Radiant) For thermoforming and other industrial processing, comfort spot, portable and pet/animal heating.
Sun Electric 1/8" Split-Sheath Cartridge Heaters Contract when de-energized for ease of installation and removal Chromalox Cartridge Heaters 1/4, 3/8, 1/2, 5/8 and 3/4" Dia.  50 - 5,000 Watts, 120 and 240 Volt, 1-1/4 - 48" Shaft Lengths, INCOLOY ® Sheath. For Dies and Molds, etc.
Immersion Direct contact heat source heats liquids, viscous fluids, forced air and gases.  Screw-Plug Immersion Heaters . Teflon* Heaters. Triple Tube Metal over the side heaters. Single Tube Metal over the side heaters. Quartz over the side heaters. triple tube quartz over the side heaters. spiral Teflon* immersion heaters Band and Nozzle Grip tightly to cylindrical surfaces to supply uniform heat transfer. Flexible and come in one or two-piece construction for easy installation and removal. Accommodate diameters as small as 15/16" and as large as 20" and capable of reaching temperatures of 1600°F. Stainless steel braids and conduit protect terminations and resist contamination.
Circulation Heaters. Screwplug or flanged type immersion heater mounted in a thermally insulated heating chamber. Designed to provide high heating efficiency to a flowing medium (liquid, steam, air or gas) by in-line or side-arm operation. Pressures to 5000 psi and temperatures to 1200°F. 1.5 to 2000 kW. Chromalox Water Circulating Mold Temperature Controller Completely self-contained water heating and cooling systems. 4.5 - 24 kW, 240 and 480V, Electronic PID Temperature and Process Control (Dual Display) Large Diameter (1-1/4" NPT) Process Piping Connections, used in any application where precision temperature control of a heating and cooling water circulation system is needed. They are particularly useful in the plastics industry as mold temperature controllers - Injection Molding Machines
Chromalox SL-B Flexible Silicone Rubber Insulated Enclosure & Air Heater. 25, 50, 100 and 250 Watts, 120 Volts. Freeze protection and condensate protection in electrical enclosures. Ring Single & Three Heat Ring Heaters.  125 - 1,800 Watts.  120 and 240 Volt.  Mounts Element to Heated Surface . Tank Bottoms, Platens, Dies, Hot Plates, Glue and Lead Melting Pot. Chrome Steel Sheath — 1200°F max. sheath temp.
Calorique Thermal Shield Drum Warmers. Offers a uniform and inexpensive method to keep 55 gallon drums of liquid at operating temperatures or protecting them from freezing. Operates at a low 240 watts, compared to alternative "belts" that use 1000 watts or more. Our durable, light weight, insulated covering is ideal for indoor and outdoor use.   Chromalox SL-N Silicone Rubber Thin profile and direct contact of the heaters provide fast, efficient heat transfer to your part.
Air Heaters. Process Air heaters include a broad variety of stock and custom designs to heat air or other gases in ducts, autoclaves or ovens. They employ an assembly of sheathed tubular, Fintube(r) or Finstrip(r) elements in various configurations that consistently outperform gas, oil and open coil electric heaters. Process air heaters are available in voltages to 600V, ratings to 3.2 megawatts and application temperatures to 1200°F. Applications include warming, drying, preheating, curing and heat treating. Elements are available separately for use in OEM equipment such as space heaters and computer room conditioning systems. BENCHMARK THERMAL flexible drum heaters can heat stored fluids to a pourable temperature.  Manufactured of high strength woven fiberglass core covered with silicone rubber.  Durable, abrasion-resistant and easy to clean. Flexibility allows roll-up for convenient storage
Dalton Electric Vacuum Diffusion Pump Heaters. Replacement heater for vacuum OEM diffusion pumps. tubular heating elements and grey iron castings (platens and rings) swaged together for 2" through 48" Diffusion Pumps Chromalox SLDH Flexible Silicone Rubber Insulated Drum Heaters. For 5, 15, 30 and 55 Gallon Metal and Non-Metal Drums, Adjustable Thermostats. Drum heaters can withstand flexing without fear of premature failure.
 Heat Transfer Selection Guide Heat Transfer Systems & Boilers Complete packaged systems with heaters, controls, pumps, valves & necessary plumbing for pumping hot or cold fluids such as water and glycol solutions. A_77.jpg (5781 bytes) Chromalox HB Two-Piece Band Heater.  1-1/2" Two-Piece Band Heater, 5 - 20" Barrel Dia., 750 - 3,000 Watts, 240 Volt, 20 - 68 W/In 2, Chrome Steel Sheath, UP to 1200°F Max. Sheath Temp., UP to 800°F Max. Barrel Temp.
Tubular Heat transfer by conduction, convection or radiation to heat liquids, air, gases and surfaces. Round, triangular, flat press and formed bends from .200" to .475" diameters, temperatures to 1600°F, up to 600 volts. Up to 172", 75 - 10,000 Watts, 120, 240 and 480 Volt, Copper, Steel, Stainless Steel, INCOLOY sheath materials Air Process for Heat Staking 1/2" diameter air process heaters
Solar Products F-Series. Industry standard in thermoforming and can be used in most other process heating applications. Strip Used for heat transfer by conduction or convection to heat liquids, air, gases and surfaces.  Used for heat transfer by conduction or convection to heat liquids, air, gases and surfaces. 1-1/2" Wide, 7-1/2 - 47-1/2" Lengths, 150 - 2,250 Watts, 120 and 240 Volt
Solar Products M, G, K Series. The G-Series heaters have also become an industry standard in thermoforming.  The M-Series heaters, with a hard-coated aluminum face has increased durability of a metal face that is often required in the thermoforming industry. Chromalox Mineral Insulated Pipe Heat Trace. MI Insulated High Temperature Cable Constant Output, Alloy 825 Sheath, Exposure Temperature to 1100°F. Industrial Freeze Protection , Tank Heating, High Temperature Process Maintenance
CP Panel Heaters Flat-Faced Wide Area Radiant Panel Heaters. Woven refractory cloth with a black ceramic coating on the front. 0.55 - 18 kW. 120, 230, 240 and 480 Volt. 1650°F Max. Emitter Temperature. 6 - 60" Long x 12 - 30" Wide, Ink Drying and Spot Curing for Printing and Silk Screening, Thermoforming and Vacuum Forming or Wherever Close Maximum Heat is Required Solar Products FBA-Series. Similar to the F-Series heater, with holes drilled in the heater face to allow for forced airflow through the heater.  The purpose of the airflow is to provide combination infrared/convection heating.  The heater can be as wide as 24" (610mm) and as long as 72" (1829mm), though not this wide and long in the same heater.
Black Star Ceramic Band Heater. Black Star Radiant Ceramic Band Heater.  When used as an infrared heater (target material in hole), it emits high efficiency infrared radiation because of the exclusive heat resistant black coating. Up to 1000°F.  Up to 480 Volts - 2" diameter and up. 1 1/2" width and up (in 1/2" increments) Solar Products Q-Series. As wide as 12" (305mm) and as long as 24" (610mm).  The QP model has a maximum watt density of 40 wsi (62 kw/m2). The QH model has a maximum watt density of 60 wsi (93 kw/m2).
Chromalox MT-1 Screw-Plug Immersion Heaters for clean water applications.  1-1/4" NPT Brass Screw Plug. Copper Sheath Elements. High Watt Density (53 - 86 W/In 2 ) 0.6 - 2 kW. 120 and 240 Volt CPHI Series Flat-Faced Wide Area Radiant Panel Heaters.  High Intensity Quartz Faced Radiant Heater, 1.6 - 4.8 kW, 240 and 480 Volt, 1750°F Max. Emitter Temp., 10" Long x 4 - 12" Wide. Moisture Removal, Soften Plastics prior to Thermoforming or Wherever Close Maximum Heat is Required
Black Star Ceramic Strip Heater. Can be used as an infrared heater up to 1000°F.  Thermoforming, Air Heating, Platens,  Molds, Ovens, Sealing, Dies, Tank Heaters, Hot Plates. 1/4"-5/16"-3/8" thickness. Up to 45 watts/square inch. Minimum 4" up to any practical length Blasdel Ceramic Generators. Ideal for wood, plastic, and other low temperature substrates. The durable nichrome wire wound around a ceramic core is embedded in ceramic material and fired in a kiln.
Blasdel COR Coil-O-Rod Generators. Powder coating, baked enamels, moisture dry off, softening plastics for compression molding or vacuum forming, degreasing, etc. Exceptionally long service life. On average, one can expect about 10,000 hours, however much longer is not uncommon. Chromalox RTU Replacement Elements. 3/8" Dia. Heart Cross-Section. INCOLOY® Sheath. 400 - 6,500 Watts. 120, 208, 240, 275 and 480 Volt 1600°F Max. Sheath Temp.
Chromalox DQ Metaray® Heaters Type DQ Direct Wire Spot Heaters. (1,000 Watt Ceramic Replacement) (375 - 500 Watt Lamp Replacement). 120 Volt,  Spot Heating, Asphalt and Vinyl Tile Glue Softening, Thawing, Touch-Up Paint Curing   Open Coil Elements. Coiled nichrome and kanthal wire. Resistance wire open coil elements are used in vacuum forming / thermoforming. Cut to length needed.
Chromalox RAD Industrial Heaters 0.40 to 4.5 kW. One metal sheathed tubular heating element in a housing assembly available in lengths between 13 5/8" and 106" Width is 3 11/16" Chromalox FR Metaray® Heaters Type FR and FRR Edison Base Spot Heaters.  (375 - 500 Watt Lamp Replacement). 120 Volt, Replaces G-30 lamps and R-40 lamps. Spot Heating, Asphalt and Vinyl Tile Glue Softening, Thawing, Touch-Up Paint Curing
Chromalox U-RAD (one or two element) 0.80 to 7.2 kW Metal Tubular Element Industrial Reflector Assemblies. 120, 208, 240, 275 and 480 Volt, 3/8" Dia. INCOLOY® Sheath Elements,  1500°F Max. Sheath Temp. Chromalox DU-RAD (Single element double hairpin) 1.6 - 7.83 kW, 120, 208, 240, 275 and 480 Volt, 3/8" Dia. INCOLOY ® Sheath Elements (type UTU), 1500°F Max. Sheath Temp.
Chromalox RAD-H Hermetically Sealed for Humid Areas (Single Element) 0.7 - 3.6 kW., 120 and 240 Volt, 3/8" Dia. INCOLOY Sheath Elements, 1000°F Max. Sheath Temp., For Humid Area Environments, Rubber and Synthetic Fabric Processing, Meat and Food Processing Chromalox RADD (two element)  1.6 - 13 kW, 120, 208, 240, 275 and 480 Volt, 3/8" Dia. INCOLOY® Sheath Elements (type RTU), 1500°F Max. Sheath Temp.
Chromalox S-RAD (Single Element) 0.95 - 4.4 kW., 120, 208, 240 and 275 Volt, 3/8" Dia. INCOLOY Sheath Elements, 1500°F Max. Sheath Temp. For Resin Curing, Thermoforming, Equipment Packaging, Mirror Manufacturing, Rubber Curing, etc. Chromalox U-RP - mounted on channels (3-6 elements) 13.2 - 36 kW , 208, 240, 275 and 480 Volt,  3/8" Dia. INCOLOY ® Sheath Elements, 1500°F Max. Sheath Temp.
Chromalox HBA One-Piece Nozzle Heaters.  1 - 4" Barrel Dia., 1 - 6" Widths, 200 - 800 Watts, 120 and 240 Volt, INCOLOY® Sheath, Up to 1500°F Max. Sheath Temp., Up to 1000°F Max. Nozzle Temp. Chromalox LN and LW Oven Modular Sections (Single Metal or Quartz Element) 0.45 - 3.8 kW. , 120, 208, 240, 480 and 600 Volt, 6" Wide Section (type LN) or 12" Wide Section (type LW)
Quartz Tubes. 3/8" and 1/2" quartz tubes.  0.35 to 4.3 kW, 120, 240, 480V, Overall lengths for 3/8" dia. tube from 13 1/2" to 41 1/2", Overall lengths for 1/2" dia. tube from 13 1/2" to 99 1/2" Chromalox RUTU (Single Hairpin Element) 0.8 - 3.6 kW., 120, 208, 240, 275 and 480 Volt, 3/8" Dia. INCOLOY Sheath Elements, 1500°F Max. Sheath Temp., High Intensity Applications, Fast-Moving Webs and other applications where high temperatures will not damage materials
Chromalox U-RAD-LT Liquid Tight Sealed Reflector Assemblies One or two U-shaped metal sheathed tubular heating elements available in lengths between 13 5/16"  and 87 1/4". The special protective terminal cover provides liquid tight protection to terminals. 3/8" diameter Incoloy® sheath elements. 120, 208, 240, 275, 480 Volts Chromalox QRT Quartz Tube Industrial Heaters. Aluminum housing containing a highly polished aluminum parabolic reflector. One 3/8" or 1/2" dia. quartz tube in lengths between 13 1/16" and 103 7/8". Width is 3 11/16" (9.37 cm). 120, 240, 480 Volts, 0.35 to 4.3 kW, 1600°F (871°C) max. source temperature. 1.33 kW/sq. ft. (3/8" quartz tube unit). 1.75 kW/sq. ft. (1/2" quartz tube unit)
Mor Quartz Tube Radiant Panels  Reflectors are stainless steel, panels are fully insulated and pre-wired to your specifications. 4, 12, 18 or 30" wide x 24, 36, 48, 60 or 72" Long Mor Quartz Tube Aluminum Extrusion Panels. 3¾” Wide x 24, 36, 48, 60 or 72" Long. Rigid extruded aluminum housing protects element from harsh industrial environments. Complete, Ready-To-Connect Assembly.
Mor Small Quartz Laboratory Immersion Heaters Small tanks and laboratory applications for experimentation, Over-the-side or L-shaped. These pencil type heaters are easily utilized in a tube or beaker. Operates at 1700ºF in air. Comes standard in 120 volts with six-foot flexible cord and plug. For heating all acids except hydrofluoric. Mor Custom Screw Plug Immersion Heaters. Copper Sheath, 304 Stainless Steel, 316 Stainless Steel, Titanium, Incoloy or Teflon for a wide range of applications. Broad selection of screw plug sizes, wattage, materials and junction box types.

Chromalox NWHJR Booster Heater-Water Applications. Heavy Wall Carbon Steel or Brass Pipe Body. 1.5 - 3 kW.  120 and 240V, Single Phase. 0.315" Dia. Copper Sheath Elements (80 W/In2). General Purpose or Moisture Resistant Terminal Enclosure. Integral Thermostat (60 - 180°F). Can be used to supply hot water or boost water temperature anywhere in a water distribution system.    

Chromalox® is a registered trademark.

Home ] Up ] Cartridge Heaters ] Dalton Electric Heating Co., Inc. Diff-Therm Heaters for Vacuum Diffusion Pumps ] Nichrome Wire (NiCr-60) in 25, 50, 75 and 100 foot lengths ] Air Heaters ] Chromalox Tubular Heaters ] Infrared Heaters ] Chromalox Band and Nozzle ] Chromalox Strip Heaters ] Heat Transfer Systems and Boilers ] Chromalox Ring Heaters ] Other Industrial Heaters ] Chromalox ROPH Heavy Duty Hot Plates ] Chromalox NWHJR Booster Heater-Water Applications ] Immersion Heaters ] Flexible Silicone Rubber Insulated Drum and Enclosure Heaters ]

We are a Distributor of Industrial, Commercial and Residential Heaters and Controls. Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website. © Copyright 1999-2019 Mor Electric Heating Assoc., Inc.

MOR ELECTRIC HEATING ASSOC., INC.
5880 Alpine Ave. NW - Comstock Park, MI 49321  USA
Tel 616-784-1121 - 800-442-2581 - Fax 616-784-7775
E-mail: sales@heatersplus.com

   follow our blog   Find us on FaceBook   watch our youtube channel   Follow us on Twitter