ETI LCD-1 Snow Switch (Automatic Control For Snow Melting)

We are an authorized stocking distributor for ETI (Environmental Technology Inc.)

Low Cost Automatic Control Reduces Snow Melting Costs

BENEFITS

• Minimum snow melting costs
• No supervision required

FEATURES

• Low cost
• Reliable automatic control
• UL Listed
• Simple installation
• Field proven in thousands of installations

The LCD-1 Snow Switch initiates snow melting at temperatures below 38° F (3.3° C) during precipitation and continue heater operation for five hours after snow stops. This ensures complete snow melting

The LCD-1 Snow Switch operates from 120 volts AC 50/60 Hz. An integral relay rated for 120 volt AC 16 Amp loads permits direct heater control for small applications such as wheelchair ramps and stairways or may operate external contactors in larger installations.  Pilot duty only with quartz lamp heaters connected a relay contactor panel.  LCD-1 can be used with constant resistance loads on amperages over 16 amps as pilot duty only (120 volt control signal to relay)

Extensive quality control, high grade components and microprocessor technology contribute to trouble-free operation. These innovative, field-proven products provide reliable automatic control in thousands of installations.

Installation and Operation Manual

You must have the free Adobe Acrobat Reader plug-in.

The ETI logo, Snow Switch, Floorstat, Tracon, and Heat Systems are registered trademarks of Environmental Technology, Inc. We Manage Heat, Digital Anticipation, ComfortTouch, Dry Floors, LCD, APS, SC, GIT, SIT, CIT, ES, HSC, FWT, GPT, ADH, EDH, RCM, RCD, RCU, FMC, SMT are trademarks of Environmental Technology, Inc. Copyright 2000, All rights reserved.