|
Qmark Fan Forced Wall Heaters
- Commercial Type EFQ
We are an authorized distributor for Qmark®
Links to other types of Wall Heaters:
Qmark Residential Fan Forced Wall Heaters
(Type CRA)
Qmark Architectural Fan Forced Wall Heaters (Type
AWH)
Qmark Commercial Fan
Forced Wall Heaters (Type CWH1000)
Qmark Commercial Fan
Forced Wall Heaters (Type CWH3000)
- Ideal for offices, stores, schools, churches, hospitals,
dormitories, airport terminals, reception rooms, entrance lobbies, corridors
and stairwells. Unit installs easily in either new or remodeled buildings.
- Operates at 6,000 or 8,000 watts at 208V, 240V, 277V, 347V,
480V or 600V, 1Ø, 60 Hz. Steel finned metal sheath electric heating
elements with low sheath temperatures provide uniform heat and long
service life.
- Rugged stamped steel front cover provides a down-flow
air pattern and is attractively finished in Northern White.
- Integral thermostat for quick installation... separate
thermostat not necessary.
|
- Thermal overheat protectors disconnect power in event of
over-heating due to accidental block-age.
- Built-in power disconnect switch for added safety during
maintenance.
- Built-in fan delay switch energizes fan motors only after
elements are heated....prevents discharge of unheated air. When heat shuts
off, the delay de-energizes fan motor after residual heat has been
dissipated.
- Can be wired with standard 60°C wire.
- Permanently lubricated, totally enclosed fan motor provides
long-life and low maintenance; gently distributes warmth through room area.
200 CFM
- Recess or surface mount.
|
Recess mounting is standard. Use optional EFQ-SM for full
surface mounting; EFQS-1 for 1" semi-recessed frame and EFQS-2 for 2"
semi-recessed mounting. All are finished in northern white baked enamel.
22-5 /4 " high x 31- 3 /4 " wide (580 mm x 810 mm).
Qmark® is a registered
trademark and division of Marley Engineered Products.
|
