|
Qmark® Type CDF Commercial Downflow
Fan Forced Ceiling Mounted Heaters
Surface mount enclosure
Links to other types of Ceiling Heaters:
Qmark Type EFF Ceiling
Mounted Heaters
Qmark Type QCH Ceiling
Mounted Heaters
We are an authorized distributor for Qmark® |
Recessed mount enclosure
- Deliver heat where you want it - in vestibules, hallways, workshops,
restrooms and entry way
-
Type CDF ceiling-mounting fan-forced heaters are designed
for commercial and industrial areas requiring electric fan-forced heat.
Capacities are 2,000 to 5,000 watts. Type CDF-SE surface enclosures are
designed to mount flat on the ceiling and extend only six inches into the
room. Type CDF-RE enclosures have no protrusions outside the recess box,
allowing the heater to recess only seven inches into ceiling space. Mounts
into permanent ceiling with trim ring.
-
MULTIPLE WATTAGE HEATER SECTIONS - The 5,000 watt heater
can be field converted to 3,800 watts or 2,500 watts, and the 4,000 watt
heater is convertible to 3,000 or 2,000 watts.
-
MULTIPLE PHASE HEATERS - The 208 and 240 volt heaters can
be field converted from single to three-phase operation. 277 volt
single-phase heater is also available.
-
AUTOMATIC THERMAL CUTOUT - A thermal cutout shuts off the
heater in the event of overheating and reactivates the heater when the
temperature returns to normal.
|
-
BUILT-IN FAN DELAY Space temperature is controlled by a
wall or unit-mounted thermostat. When the thermostat calls for heat, the
heating elements and fan energize. When the thermostat is satisfied, the
elements shut off, but the fan continues to operate until all of the heated
air is discharged. This feature avoids exposing the heater to residual heat,
thus achieving a high comfort level and longer component life.
-
Navajo white finish
-
Wire Size - AWG 10
-
U.L. listed
-
|
 |
SINGLE PERSON HANDS FREE INSTALLATION - Every heater has two
installation aids unique to the industry - Spring Clips temporarily
support the heater section until the mounting hardware is secured. |
 |
THUMB PINS align and temporarily hold the enclosure cover to
the heating section freeing both hands to finish installation. |
Type CDF-RE enclosures also mount easily into standard 2 x 2 ceiling grids
|
Choose between: (Required) |
| CDFSE Surface Mounting Enclosure |
CDFRE Recessed Mounting Enclosure |
| 20"L x 16 1/2"W x 5 3/4"D |
23 3/4"L x 23 3/4"W x 7"D |
Totally adjustable airflow . . . even from 14 foot ceilings!
|
Wall Mount Thermostats: (Optional) |
|
WR10001 |
WR-65 |
1A65-641 SPST Thermostat, 40°F to 85°F, 22 amp 120/240V, 18 amp 277V, Single Pole, wall mount |
$26.35 |
 |
|
AUBE10003 |
TH106 |
Aube Tech. 120/240V, S.P.S.T., Programmable Line Voltage
Thermostat |
$63.67 |
|
|
QMARK98319841025 |
TC1 |
Qmark Clear Plastic Universal Lockable Thermostat Guard. Dimensions: 7"L x
4.28"H x 2.74"D. |
$52.20 |
|
| *This delivery time
is for normal conditions and is subject to Qmark factory availability. |
Qmark® is a
registered trademark of Marley Engineered
Products.
|
