|Home | Ordering | Contact Us | Heaters | Controls | Accessories | Search|
SB-1800 Surebond Everflex Bondaprene
We are an authorized distributor for Surebond, Inc.
For adhering metal or plastic roof clips to metal roofs only. Not for
A tube of Surebond is estimated to be enough to adhere 20 roof clips.
TECHNICAL DATA SHEET
APPLICATION: Interface and surfaces must be clean, dry and free of dust, dirt, oil, frost, moisture and water proofing and release agents. All painting should be done before application. Cut cartridge nozzle for 3/8” hole and puncture inner seal, apply bead size as desired. Always apply uniform bead and tool immediately after application to ensure full contact with both sides of the joint area. Squeeze out should not occur on most overlap seals applied properly. Sealant starts to skin over in five to ten minutes and dries to the touch within an hour.
CLEANING: While uncured, remove excess material from tools with Xylene. After curing, sealant can be easily cut away. See cautions on cleaner labels.
SHELF LIFE: 12 months.
STORAGE: Unopened containers should be stored for up to nine months at 60ºF to 70ºF, 50% R.H. in a cool, dry area.
CAUTION: For industrial use only. Skin and eye irritant. Harmful if swallowed. Avoid contact with or breathing in of vapor and use adequate ventilation. Material on skin should be wiped and washed off with soap and water. For eyes, flush with water and seek medical attention.
SEE MATERIAL SAFETY DATA SHEET.
PACKAGING: 10.3 oz. cartridge
• Fast cure
• Wide application temperature
• No shrinkage
• One part
• Protects welds from corrosion
• Minimizes dirt and dust pick up, expedited production
• Product maintains integrity and flexibility in service temperature range
• Can be applied from -20ºF to over 140ºF
• Reduces product need by 50%
• Allows for panel and overhead applications
• Will not discolor materials
• Easy application
Tack Time 40-60 Minutes TT-S-00230C Test Method
Cure Time 24 Hours Using 1/8” Bead
Tensile Strength 360 PSI ASTM-D412 Test Method
Service Temperature, Cured -80ºF to +480ºF TT-S-00230C Test Method
More information about Adhering Roof Clips to a metal roof when using roof & gutter heating cable
|Item ID||Catalog #||Description||Click "Select" below to see our price and actual real-time quantity in stock|
We are a Distributor of Industrial, Commercial and Residential Heaters and Controls. Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website. © Copyright 1999-2013 Mor Electric Heating Assoc., Inc.
ELECTRIC HEATING ASSOC., INC.